Abrasive Diamond CBN Grinding Wheel , Single Crystal Corundum Grinding Wheels

High Performance Ceramic Bonded Single Crystal Corundum Grinding Wheel

Suitable for grinding high hardness and toughness materials

such as high vanadium high speed steel, austenitic stainless steel and titanium alloy

Model Type: TYC-GW-019

Single crystal corundum grinding wheel is made of single crystal corundum as raw material into various shapes of consolidated grinding tools. It has high hardness, high toughness, good self sharpening property and is not easy to block.

Process Flow:

First, the single crystal corundum material is pressed and bonded by a mold with a binder, and then the grinding wheel is fired at high temperature. In general grinding, compared with other grinding wheels, the advantages are not particularly obvious. However, if we process some special workpieces according to the characteristics of the materials, we can achieve better results.

Scope of application:

Used for cutting and grinding tools, suitable for grinding high hardness and high toughness materials such as high vanadium high speed steel, austenitic stainless steel and titanium alloy, especially for dry grinding and grinding of easily deformed and easily deformed workpieces.

Main features of CBN grinding wheel:

• High grinding efficiency

• High wear resistance: the wear resistance of the grinding wheel is high, and the abrasive consumption is small, especially when grinding hard and brittle workpiece.

• Low grinding force and low grinding temperature

• The workpiece has high precision, high finish and good shape retention

Sketch map of our CBN abrasive wheel

D: out diameter

H: inner diameter

T: thicknesss

X: abrasive area width

Specificaion of Our Graphite Grinding Wheel:

• Out Diameter: 350mm

• Inner Diameter: 40 mm

• Thickness: 127 mm

More Pictures of our CBN Grinding Wheel

Precautions for use:

• Please check carefully before installing the cutting wheel. If there is any gap or other damage, please stop using it.

• When the cutting wheel is marked with the rotation direction, it should be consistent with the rotation direction of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to give full play to the performance of the cutting wheel.

• Please do not use the cutting wheel that does not meet the requirements.

• If any abnormality is found in the cutting process, stop the machine immediately and check the cause.

• When the cutting is not sharp, the grinding wheel should be trimmed. If it is used continuously, the grinding wheel may be damaged due to overheating and overload.

• When the grinding wheel rotates, it is strictly forbidden to cut by hand, let alone touch the sand by hand and body

• The cutting wheel is forbidden to be used in operations other than grooving or cutting, so as to avoid abnormal operation due to uneven stress.

Ordering instructions:

When you order for the first time, please provide the following parameters, so that we can help you choose the most suitable cutting wheel.

Specification and size: abrasive, particle size, binder, outer diameter, thickness, inner diameter, abrasive working layer width, substrate thickness, etc. purpose: workpiece name, cutting size, cutting material;

Service conditions of grooving and cutting: machine tool, grinding wheel speed, feed speed and cutting depth;

Dry and wet cutting requirements: cutting accuracy, chipping requirements, processing surface integrity, etc

Special requirements: whether the tool is assembled and used, whether the resin cutting wheel needs to conduct electricity, whether the outer circle of the cutting wheel has a water tank, the size and quantity of the water tank, whether there is a chip removal groove on the outer side of the cutting wheel base, etc.

Order Operating Procedure: